|
Posted by Bjoern Morgenthaler on October 12, 2006, 10:48 am
If you were Registered and logged in, you could reply and use other advanced thread options
Hi,
I got the following network setup:
PSTN ---- Cisco 2821 --- SIP Phone
(ISDN)
The voice routing should be: a fix ISDN Number (BRI Q.931) should always
be routed to a fix sip phone. The call is always initiated from PSTN's
side. A transfer from sip to PSTN should also work.
As Voice-Port on the 2821 I use a VIC2-2BRI-NT/TE.
Also the CME (v4.0) is enabled on the router but not necessary to use.
I tried very hard the last weeks to get this setup working (including
all the cisco reference guides) but so far it's not working.
Can someone give me hints for configuration (or even a sample
configuration for this setup) to get me going on? The network and IP
setup is fine, only for the voice setup I need help.
Thanks in advance!
B. Morgenthaler
| 
NewsGroups 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map