|
Posted by on June 19, 2008, 6:34 am
If you were Registered and logged in, you could reply and use other advanced thread options
Hello,
I've got an issue with the device fault manager on CiscoWorks.
Basically, what i wanted to do was to stop the ExceededMaximumUptime
reported to many times on all my routers (ADSL interface). I tried to
do some tweaking but even if I don't have ExceededMaximumUptime
anymore, a HighUtilization alert replaced it (with many more alert :-
( ).
What I did :
Edited a customisable interface group.
create ruel expression : Interfaces.Type equals "ADSL"
Polling and Thresholds > Managing Thresholds > edit and set dial-on-
demand interface support settings - maximum uptime to 0 (default value
7200).
settings priority > Interface Threshold Groups > putted the group on
the first position. then saved the config.
I don't know what's wrong with that, but obviously it's not good.
I could set the HighUtilization value to 80 or more (default value :
40%) but i had some crazy value reported (more than 200% sometimes).
so It's not relevant to change it.
Any help is more than welcome :)
Many Thanks
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map