|
Posted by Ginger on January 13, 2007, 11:50 am
If you were Registered and logged in, you could reply and use other advanced thread options
Hi
has anyone any experience of setting up a VPN tunnel with between these two?
I have managed to get the IKE side of things up but not the IPSEC, I am
might confused.
Any help will be greatly appreicated.
|
  | |
Posted by www.BradReese.Com on January 13, 2007, 3:20 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Hi Ginger,
You may wish to investigate D-Link DI-804HV:
VPN Wizard
http://support.dlink.com/emulators/di804hv/vpn.htm
Sincerely,
Brad Reese
2007 Cisco Salary Rates
http://www.bradreese.com/compensation-database.htm
|
|
Posted by Ginger on January 13, 2007, 9:14 pm
If you were Registered and logged in, you could reply and use other advanced thread options
> Hi Ginger,
>
> You may wish to investigate D-Link DI-804HV:
>
> VPN Wizard
>
> http://support.dlink.com/emulators/di804hv/vpn.htm
>
> Sincerely,
>
> Brad Reese
> 2007 Cisco Salary Rates
> http://www.bradreese.com/compensation-database.htm
>
Hi Brad,
I did just that but it still get the IKE up but not the IPSEC side of
things. The only thing I can think of is the mask of the local network on
the 3000 is a 19 bit mask.
|
|
Posted by www.BradReese.Com on January 13, 2007, 9:46 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Configuring NAT Transparent Mode for IPSec on the VPN 3000
Concentrator:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_tech_note09186a00800946af.shtml
Sincerely,
Brad Reese
Cisco Networking Academy WAN Emulation Lab Kits
http://www.bradreese.com/adtran-wan-emulation.htm
|
|
Posted by Ginger on January 14, 2007, 5:56 pm
If you were Registered and logged in, you could reply and use other advanced thread options
> Ginger,
>
> Configuring NAT Transparent Mode for IPSec on the VPN 3000
> Concentrator:
>
>
http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_tech_note09186a00800946af.shtml
>
> Sincerely,
>
> Brad Reese
> Cisco Networking Academy WAN Emulation Lab Kits
> http://www.bradreese.com/adtran-wan-emulation.htm
>
Hi Brad,
thanks for the reply, there is no natting at all, both devices have internet
addresses, (Class C), but I see where you are coming from, the only problem
is that I cannot change the port on the Dlink.
|
| Similar Threads | Posted | | Cisco 3005 Concentrator + DLink 804HV Router | July 20, 2005, 11:46 pm |
| Dlink DI-804HV <-> DI-804HV VPN Blues | March 5, 2006, 9:14 pm |
| Odd problem with DLink DI-804HV | November 3, 2005, 3:50 pm |
| dlink 624 and cisco VPN -can not get to work | February 28, 2005, 12:14 pm |
| VPN tunnel between Dlink DFL-700 and Cisco | January 18, 2007, 2:57 pm |
| Cisco Concentrator 3000 | August 14, 2005, 7:03 pm |
| Cisco VPN 3000 concentrator | November 29, 2007, 7:40 pm |
| connecting Cisco with Linux or Windows | April 29, 2005, 5:18 pm |
| VPN 3000 , Domain Controller, Cisco Secure ACS | December 21, 2006, 12:41 am |
| cisco vpn connection to vpn concentrator 3000 not passing web traffic | August 21, 2006, 11:44 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map