|
Posted by headsetadapter.com on September 27, 2007, 6:14 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Phil,
Do you have them configured with Static IP addresses? Usually TFTP server is
configured through DHCP (Option 150). Make sure you connect 7936 to correct
subnet.
As an alternative, I can offer you to put a PC with TFTP server (for
example, freeware), where you put required files. Configure PC with IP
address the phones are looking for, and you should be able to get out of the
loop.
Good luck,
Mike
CCNP, CCDP, CCSP, Cisco Voice, MCSE W2K, MCSE+I, Security+, etc.
CCIE R&S (in progress), CCIE Voice (in progress)
------
Headset Adapters for Cisco IP Phones
www.ciscoheadsetadapter.com
www.headsetadapter.com
> Hi,
>
> Does anyone know how to default a Cisco IP conference station
> (CP-7936) . I have 2 that are stuck in a loop looking for a
> particular
> TFTP server. it won't boot to any of the menus to allow me to change
> the config.
>
>
> Rgds
>
>
> Phil
>
|