|
Posted by jego on June 24, 2007, 11:46 pm
If you were Registered and logged in, you could reply and use other advanced thread options
This seemed to have worked. I am just using a standard SIP soft-phone to
test.
voice-port 2/0
ring number 2
cptone CA
caller-id enable
!
dial-peer voice 1 pots
destination-pattern .T
port 2/0
!
sip-ua
nat symmetric check-media-src
!
>I have a Cisco 1760 Series router with a 2x FXO Modular Voice adapter card
>installed.
>
> The IOS Image is c1700-advipservicesk9-mz.124-13b.bin.
>
> Can someone point me in the right direction? I would like to be able to
> connect my PSTN POTS phone line to this card and then use either a soft
> phone, ATA, or VOIP phone through ethernet.
>
> A simple configuration example for my scenario would also be appreciated.
>
> Cheers!
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map