Changing IPs

Changing IPs
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.sys.cisco  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Changing IPs Tom Linden 05-29-2008
Posted by Tom Linden on May 29, 2008, 6:41 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Have a 2621 running 12.3

Got a new set of IPs and serial line(T1)
from the console # prompt can't ping the first two
but can the last one, f0/1
f0/0
s0/0
f0/1

I modified an existing config to reflect the new values for f0/0
and s0/0

ideas?

--
PL/I for OpenVMS
www.kednos.com

home networking made easy, greater protection, less stress, introducing nm 5.0, 728x90
Posted by Tom Linden on May 29, 2008, 6:45 pm
If you were  Registered and logged in, you could reply and use other advanced thread options

> Have a 2621 running 12.3
>
> Got a new set of IPs and serial line(T1)
> from the console # prompt can't ping the first two
> but can the last one, f0/1
> f0/0
> s0/0
> f0/1
>
> I modified an existing config to reflect the new values for f0/0
> and s0/0
>
> ideas?
>
Should have added that f0/1 is on 10.x.x.x and the router is doing NAT


--
PL/I for OpenVMS
www.kednos.com

Posted by Trendkill on May 29, 2008, 6:52 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
:
> > Have a 2621 running 12.3
>
> > Got a new set of IPs and serial line(T1)
> > =A0from the console # prompt can't ping the first two
> > but can the last one, f0/1
> > f0/0
> > s0/0
> > f0/1
>
> > I modified an existing config to reflect the new values for f0/0
> > and s0/0
>
> > ideas?
>
> Should have added that f0/1 is on 10.x.x.x and the router is doing NAT
>
> --
> PL/I for OpenVMSwww.kednos.com

sh ip int brief

Posted by Trendkill on May 29, 2008, 6:59 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
> Have a 2621 running 12.3
>
> Got a new set of IPs and serial line(T1)
> =A0from the console # prompt can't ping the first two
> but can the last one, f0/1
> f0/0
> s0/0
> f0/1
>
> I modified an existing config to reflect the new values for f0/0
> and s0/0
>
> ideas?
>
> --
> PL/I for OpenVMSwww.kednos.com

Your config may also be helpful.

Posted by Merv on May 29, 2008, 8:39 pm
If you were  Registered and logged in, you could reply and use other advanced thread options

what is the toplogy ?

default is pointed at the T1 next-hop and the description for fa 0/0
is outside interface to Internet

Usually default would point at the Internet ...

Similar ThreadsPosted
changing IP addresses for VPN April 28, 2005, 4:39 am
Changing IP address of PIX June 19, 2006, 10:26 am
Changing PIX-PIX VPN address October 18, 2006, 7:51 am
Time Changing January 25, 2007, 6:27 am
Time Changing January 25, 2007, 6:27 am
Time Changing January 25, 2007, 6:27 am
changing pix internal address October 11, 2005, 9:44 am
Changing default gateway over. December 19, 2005, 10:57 am
Changing caller id information June 5, 2006, 4:11 pm
Cisco Pix 501 - changing mac address July 8, 2006, 8:39 am

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map