CISCO 1841 - X.25 - XOT - EICON

CISCO 1841 - X.25 - XOT - EICON

NewsGroups | Search | Tools
 comp.dcom.sys.cisco  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
CISCO 1841 - X.25 - XOT - EICON cisco.kid 11-01-2006
Posted by cisco.kid on November 1, 2006, 2:34 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi:

We have a following configuration.

Server 1 (Eicon Card- Interface X.25) --> Eripac (Ericsson Switch
X.25) -> Siemens Exchange EWSD

With this configuration the Server 1 woking normally.

We have to change for:

Server 1 (Eicon Card - Interface X.25) -> Router Cisco 1841 -> Router
Cisco 1841 -> Siemens EWSD

The configuration in the CISCO 1841 (Server 1) is:

version 12.4
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname FTAM_X25
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$/zXP$KK4pNiMatl/Bi6D.us6zY/
!
no aaa new-model
!
resource policy
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
ip cef
!
!
no ip dhcp use vrf connected
!
!
!
x25 routing
username cisco password 0 cisco
!
!
!
interface FastEthernet0/0
ip address 192.168.25.128 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0/0
no ip address
encapsulation x25 dce
no ip mroute-cache
x25 address 744802100141
x25 htc 85
x25 facility windowsize 7 7
x25 facility packetsize 128 128
x25 nvc 8
clockrate 64000
!
ip classless
!
ip http server
!
snmp-server community public RO
snmp-server enable traps tty
x25 route 744802100099 xot 192.168.25.102
x25 route 744802100100 xot 192.168.25.103
x25 route 744802100148 xot 192.168.25.104
x25 route 744802100302 xot 192.168.25.105
x25 route 744802100127 xot 192.168.25.106
x25 route 744802100147 xot 192.168.25.107
x25 route 744802100101 xot 192.168.25.108
x25 route 744802100143 xot 192.168.25.109
x25 route 744802100117 xot 192.168.25.110
x25 route 744802100119 xot 192.168.25.111
x25 route 744802100125 xot 192.168.25.112
x25 route 744802100121 xot 192.168.25.113
x25 route 744802100123 xot 192.168.25.114
x25 route 744802100103 xot 192.168.25.115
x25 route 744852100500 xot 192.168.25.116
x25 route 744852100504 xot 192.168.25.117
x25 route 744852100502 xot 192.168.25.118
x25 route 744852100506 xot 192.168.25.119
x25 route 744852100522 xot 192.168.25.120
x25 route 744802100134 xot 192.168.25.121
x25 route 744806100706 xot 192.168.25.122
x25 route 744806100700 xot 192.168.25.123
x25 route 744807100900 xot 192.168.25.124
x25 route 744802100141 interface Serial0/0/0
x25 route 744802100132 xot 192.168.25.101
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
login local
!
end



Using the command "debug x25 all" receive the following message:


*Oct 25 20:21:38.652: Serial0/0/0: X.25 I R1 Call (24) 8 lci 8
*Oct 25 20:21:38.652: From (15): 744802100141300 To (15):
744802100132301
*Oct 25 20:21:38.652: Facilities: (0)
*Oct 25 20:21:38.652: Call User Data (4): 0x03010100 (unknown)
*Oct 25 20:21:38.656: [192.168.25.101,1998/192.168.25.128,17777]: XOT O
P2 Call
(30) 8 lci 1
*Oct 25 20:21:38.656: From (15): 744802100141300 To (15):
744802100132301
*Oct 25 20:21:38.656: Facilities: (6)
*Oct 25 20:21:38.656: Packet sizes: 128 128
*Oct 25 20:21:38.656: Window sizes: 2 2
*Oct 25 20:21:38.656: Call User Data (4): 0x03010100 (unknown)
*Oct 25 20:21:38.676: [192.168.25.101,1998/192.168.25.128,17777]: XOT I
P2 Clear
(5) 8 lci 1
*Oct 25 20:21:38.676: Cause 0, Diag 76 (DTE originated/Facility not
provided w
hen expected)
*Oct 25 20:21:38.676: Serial0/0/0: X.25 O R1 Clear (5) 8 lci 8
*Oct 25 20:21:38.676: Cause 0, Diag 76 (DTE originated/Facility not
provided w
hen expected)
*Oct 25 20:21:38.688: Serial0/0/0: X.25 I R1 Clear Confirm (3) 8 lci 8
*Oct 25 20:21:38.688: <detached>: XOT O P7 Clear Confirm (3) 8 lci 1


I you have any idea what happened.

Helder Perez


Similar ThreadsPosted
Cisco 1841 September 5, 2006, 12:16 pm
cisco 1841 July 23, 2007, 11:36 am
Cisco 1841 July 5, 2008, 6:36 am
Cisco 1841 - Voice January 12, 2006, 12:27 pm
Cisco 1841 Router June 14, 2007, 10:26 pm
Help w/ routing on Cisco 1841... December 30, 2007, 9:28 pm
CISCO 1841 SDSL (UK) & TCP-MSS January 20, 2008, 5:52 pm
Cisco 1841 T1 & Firewall Config HELP!!!!!!!!! November 9, 2005, 12:45 pm
FTP port open on Cisco 1841 April 11, 2006, 5:40 pm
Cisco 1841 - Bonded DSL Configuration August 21, 2006, 11:45 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map