|
Posted by glgxg on December 30, 2005, 10:48 pm
If you were Registered and logged in, you could reply and use other advanced thread options
andy_cha@yahoo.com wrote:
> Hi -
> long time now Linksys BEFVP41 discussion... I have a BEFVP with a
> public IP and ready to accept vpn connection from "any ip" (provided
> the pre-shared key is correct). Then I'm trying to access the BEFVP41
> from an W2K box that is in a subnet, the gateway to the subnet is
> configured to pass through IPSec and PPTP but I can't get the
> connection working. tried evertything as described at linksys website
>
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=207&p_created=1084206537&p_sid=sMePbdYh&p_accessibility=0&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NDUmcF9wcm9kcz0xNzYsMTg1LDM2OCZwX2NhdHM9JnBfcHY9My4zNjgmcF9jdj0mcF9zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3NjZl9sYW5nPTEmcF9wYWdlPTE*&p_li=&p_topview=1
> the difference to the article referred to above is that the W2K box is
> not on the WAN. (VPN works fine with two BEF routers, one BEF router
> may even be somwhere in a subnet and the other only have dynamic IP).
> thanks!
> andy
>
By "access the BEFVP41" do you mean bring up the router interface in a
browser? Or, are you trying to make a VPN connection between two PC's
on the same LAN?
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map