|
Posted by on October 4, 2007, 10:40 pm
If you were Registered and logged in, you could reply and use other advanced thread options
On Sep 22, 6:40 am, railteac...@hotmail.com wrote:
> Hello,
>
> I am trying to get the e-Mail feature of my Partner Messaging R7
> working. I'm using a networked Win 2000 machine with the Unified
> Messaging program installed and apparently working. The "unify with e-
> mail" box is checked on the mailbox extension I'm testing, and the
> digitized message immediately shows up in the "holding" folder, but
> nothing else happens.
>
> I have a generic no-auth SMTP forwarding account set up, but the e-
> mail header seems to be invalid. For example, it says
> "Messag...@mymail.com@smtp.com". The folks at the forwarding service
> tell me the last "@smtp.com" just won't work, but I'm not even certain
> the message is leaving my computer.
>
> Does anyone have a step-by-step setup instruction for using SMTP with
> the R7 Messaging? I'm reasonably sure the problem is with the domain
> and mail server entries...I don't know enough about what I'm doing to
> understand what really needs to go in these boxes. So far, I've spent
> about 3 days tinkering with this setup, and have tried about every
> combination I can think of.
>
> Any help is appreciated!
Go to Avaya.com, on the home page on the right side there is a box
marked "support". click on "Documentation" then select Partner
Messaging Rel. 7.0. go to "Partner Messaging: Installation,
Migrations, updates and configurations". There should be a step by
step proceedure located in that document. good luck.
| 
NewsGroups 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map