|
Posted by Michael Roberts on September 22, 2005, 10:25 am
I did not know that regarding PIP. We have avoided using PIP in our
configuration because it has a tendency to scew our logs. Good info.. Thx.
-mike
Angler wrote:
> When using PIPs you don't need to enable server processing... normally
> anyway. 10.0.28.5 is old and buggy. Get the latest code.
>
> Also, it's probably not related, but try enabling IP forwarding. PIP
> may require this even though it's all on one subnet. Seems to ring a bell.
>
> Also a real server of tmout=2 is highly discouraged as a session can be
> aged out too early (before a FIN or RST is received by the switch).
>
> Oh... and most important of all, your configuration is missing a virtual
> server and service (VIP and VPORT). Maybe you didn't paste it in?
>
> Angler
>
> Michael Roberts wrote:
>
>> I might be misunderstanding your question, but if you have client and
>> server traffic being seen on the same port of the Alteon, logic would
>> tell me that you need to enable both client and server processing on
>> that port...
>>
>> ws wrote:
>>
>>> Hello
>>> i'm trying to set up alteon AD4 web switch
>>> making config directly from manual
>>> and it's not working
>>> alteon is connected to switch using first port
>>> all servers and vip are in the same subnet
>>> and it's not working... can anyone give me the clue why ?
>>> here is my config
>>> i'm trying to connect using client connected to the same switch in
>>> the same subnet (tryied already to connect form client in another and
>>> still no success)
>>>
>>> script start "Alteon AD4" 4 /**** DO NOT EDIT THIS LINE!
>>> /* Configuration dump taken 15:38:30 Wed Sep 21, 2005
>>> /* Version 10.0.28.5, Base MAC address 00:0e:62:f5:74:60
>>> /c/stp 1/off
>>> /c/ip/if 1
>>> ena
>>> addr 10.10.2.2
>>> mask 255.255.255.0
>>> broad 10.10.2.255
>>> /c/ip/gw 1
>>> ena
>>> addr 10.10.2.1
>>> /c/ip/frwd/off
>>> dirbr disabled
>>> /c/slb
>>> on
>>> /c/slb/real 1
>>> ena
>>> rip 10.10.2.98
>>> tmout 2
>>> inter 30
>>> name "rdp0"
>>> /c/slb/real 2
>>> ena
>>> rip 10.10.2.99
>>> tmout 2
>>> name "rdp1"
>>> /c/slb/port 1
>>> client ena
>>> proxy ena
>>> pip 10.10.2.27
>>> /c/slb/port 2
>>> pip 10.10.2.21
>>> /c/slb/port 3
>>> pip 10.10.2.22
>>> /c/slb/port 4
>>> pip 10.10.2.23
>>> /c/slb/port 5
>>> pip 10.10.2.24
>>> /c/slb/port 6
>>> pip 10.10.2.25
>>> /c/slb/port 7
>>> pip 10.10.2.26
>>> /c/slb/port 8
>>> proxy ena
>>> pip 10.10.2.20
>>> /c/slb/layer7/redir
>>> /
>>> script end /**** DO NOT EDIT THIS LINE!
>>>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map