|
Posted by flamer die.spam@hotmail.com on July 23, 2007, 12:26 am
If you were Registered and logged in, you could reply and use other advanced thread options
Hi I have AT-8000s Switches,
is there a way to have the device separate voice and data traffic from
the same port? with a cisco i can plug the pc into the voip phone,
then the voip phone into the switch and configure it like:
interface range GigabitEthernet0/1 - 23
switchport access vlan 101
switchport mode access
switchport voice vlan 105
is there any equivalent command on the allied's?
Flamer.
| 
NewsGroups 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map