|
Posted by Armond Perretta on March 29, 2007, 10:10 am
If you were Registered and logged in, you could reply and use other advanced thread options Armond Perretta wrote:
> My setup has a cable modem feeding a Linksys wired router, with the
> T/A (D-Link DVG-1120M) behind the router. Everything seems to be
> working well, and I can administer the router with 192.168.1.1, etc.
> However the T/A, which shows up as 192.168.1.101 in the client list,
> cannot be administered with this IP. The default T/A IP
> (192.168.15.1) doesn't work either. Comments gladly accepted.
Responding to my own post (oops). I learned that by using the LAN port on
the T/A with a computer set for DCHP auto, I can just admin the T/A with its
default IP. This is what happens when you send a boy (me) to do a man's
(network administrator) job.
--
Good luck and good sailing.
s/v Kerry Deare of Barnegat
http://home.comcast.net/~kerrydeare
|