|
Posted by Ryan on November 28, 2006, 6:04 pm
If you were Registered and logged in, you could reply and use other advanced thread options
My VS R3 module died. Power light doesn't come on, nothing. Dial
Int-777 get slow busy.
I've got a new R5 on the way so I decided to start reading on
installation. It seems the VMS Hunt Group 7 has to be set. It says I
should have a Form B1 and Form B2, which I have neither of. So I dont
know how the original install was set up.
Is there a way to determine which extensions to assign my new 4 Port R5
to?
I've my setup goes like this:
I've got two 5 "port" racks for the system.
Rack 1:
Slot 1 - 206E (10/11/12/13/14/15)
Slot 2 - 206E (16/17/18/29/20/21)
Slot 3 - System Processor / Partner II R4.1
Slot 4 - 206E (22/23/24/25/26/27)
Slot 5 - 206E (28/29/30/31/32/33)
Rack 2:
Slot 1 - 206E (34/35/36/37/38/39)
Slot 2 - 206E (40/41/42/43/44/45)
Slot 3 - Expansion Processor
Slot 4 - Partner Mail VS R5 (soon)
Slot 5 - 206E (no numbers)
So would that make my PMVS5 use 46/47/48/49 and have 50 as the next
open extension?
Thank you for your time,
Ryan
| 
NewsGroups 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map