|
Posted by Joerg Dorchain on December 15, 2004, 12:59 pm
If you were Registered and logged in, you could reply and use other advanced thread options
> > Hi,
> >
> > I got a 803 which "does not boot anymore". In fact, it boots only into
> > the Tiny Rom, where all I get is a boot> prompt.
> >
> > Does someone know how to recover (or reset) a tiny rom password?
> Tyy typing "reset" or "boot"
TinyROM version 1.0(2)
Mon Nov 02 17:14:21 1998
Copyright (c) 1998 by cisco Systems, Inc.
All rights reserved.
POST ......... OK. 4MB DRAM, 4MB Flash.
auto-boot: failed, "no such file"
boot> reset
reset: failed, "permission denied"
boot> boot
boot: failed, "permission denied"
boot>
> Conf just be that config register (config-register) is set to boot to ROM,
> of the image in flash is deleted/corrupt.
> Also see
>
http://www.cisco.com/en/US/products/hw/routers/ps380/products_field_notice09186a00800940ec.shtml
> where they recommend
> set boot-action=flash
> set ios-conf=0x2102
> save and then power cycle. Or type "reset" or "boot"
I've found this article. This does not work, as all given commands fail
with "permission denied". For clarification, it is _not_ the enable
password for the IOS, this is a locked Tiny Rom
Bye,
Joerg
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map