|
Posted by Helmut on April 18, 2008, 10:56 am
If you were Registered and logged in, you could reply and use other advanced thread options
I want do use the Cisco ACS for 802.1x authentication with a Third Party
Switch (Alcatel).
With a Cisco switch everything works fine. This is also true with the
Alcatel Switch as long as I set the Radius Type in the ACS to IETF.
Put for some purpose I need VSAs (RADIUS Vendor-Specific Attributes). So
I created my on VSA Import File and imported it with the "CsUtil.exe"
command in the ACS.
Then I configured the ACS to use this new Radius Type for my Third Party
Switch.
Now the Authentication don't work anymore. In the "Failed Attempts"-Log
of the ACS I can find the following entry: "Bad request from NAS".
Any Idea what is going wrong?
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map