|
Posted by Jonathan Sturges on February 22, 2005, 10:25 am
If you were Registered and logged in, you could reply and use other advanced thread options
madunix wrote:
> How to create monitoring port (Sniffer Port) on 3Com switch 3300XM?
>
> Thanks
>
>
Do you have fairly current firmware in that switch? The latest is 2.72,
released Sept. 2004. Monitoring may not be available in older firmwares
(mine has 2.71).
In the web GUI, click Configuration on the left-hand side, then click
"Roving Analysis Port." Then change "Roving Analysis State" to
"Enabled," and select a port to monitor (looks like you can only monitor
one at a time) and a port to mirror it to (analysis port). If you have
a stack you should be able to have a monitor port and analysis port in
different units. Pretty cool.
good luck,
Jonathan
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map