2610 and 2610XM can not see NM-1E-2W

2610 and 2610XM can not see NM-1E-2W
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.sys.cisco  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
2610 and 2610XM can not see NM-1E-2W Zoong Pham 06-26-2006
Posted by Zoong Pham on June 26, 2006, 11:42 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Both of my routers 2610 and 2610XM can not see a NM-1E-2W.
What's wrong?
Is that because of the IOS are too old?
If that's the case, where can I download newer ones?

Thanks,
ZP

Details are below:

2610XM:
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 24-Sep-02 01:12 by pwade
Image text-base: 0x8000808C, data-base: 0x80B1F640

ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)

Router uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:S26XMB-12.2.12a"

cisco 2610XM (MPC860P) processor (revision 0x100) with 27648K/5120K bytes of
memory.



2610:
Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)

Copyright (c) 1986-1999 by cisco
Compiled Tue 07-Dec-99 02:12 by phanguye
Image text-base: 0x80008088, data-base: 0x807AAF70

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

MIMH069 uptime is 10 minutes
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.120-7.T"

cisco 2610 (MPC860) processor (revision 0x202) with 20480K/4096K bytes of memory.

Posted by Doug McIntyre on June 27, 2006, 12:44 am
If you were  Registered and logged in, you could reply and use other advanced thread options
>Both of my routers 2610 and 2610XM can not see a NM-1E-2W.
>What's wrong?

You're trying to put a module for only the 36xx (and up) line into the
2600 line. Won't work. Sorry. The only "expansion" module that works
in the 2600 is the NM-2W. The only ethernet modules are the NM-1E and NM-4E.

The Combo expansion modules only work in the 3600's.

Posted by Zoong Pham on June 27, 2006, 2:50 am
If you were  Registered and logged in, you could reply and use other advanced thread options
> You're trying to put a module for only the 36xx (and up) line into the
> 2600 line. Won't work. Sorry. The only "expansion" module that works
> in the 2600 is the NM-2W. The only ethernet modules are the NM-1E and NM-4E.
>
> The Combo expansion modules only work in the 3600's.

Thanks for the clarification.

Can the 2610 and 2610XM take any FE NM?
And are there any minimum IOS required for that?

What are the latest IOS for 2610 and 2610XM?
12.3T ?

Thanks,
ZP

Posted by www.BradReese.Com on June 27, 2006, 2:56 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi ZP,

You may wish to investigate Cisco 2600 Documentation:

http://www.cisco.com/en/US/products/hw/routers/ps259/tsd_products_support_series_home.html

as well as the Cisco IOS Software Selector:

http://tools.cisco.com/ITDIT/ISTMAIN/servlet/index

Hope this helps.

Brad Reese
BradReese.Com - Cisco Network Engineer Directory
http://www.bradreese.com/network-engineer-directory.htm
1293 Hendersonville Road, Suite 17
Asheville, North Carolina USA 28803
USA & Canada: 877-549-2680
International: 828-277-7272
Fax: 775-254-3558
AIM: R2MGrant
Website: http://www.bradreese.com/contact-us.htm


Posted by J on June 27, 2006, 10:19 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Zoong Pham wrote:
> > You're trying to put a module for only the 36xx (and up) line into the
> > 2600 line. Won't work. Sorry. The only "expansion" module that works
> > in the 2600 is the NM-2W. The only ethernet modules are the NM-1E and NM-4E.
> >
> > The Combo expansion modules only work in the 3600's.
>
> Thanks for the clarification.
>
> Can the 2610 and 2610XM take any FE NM?
> And are there any minimum IOS required for that?
>
> What are the latest IOS for 2610 and 2610XM?
> 12.3T ?
>
> Thanks,
> ZP

Yes. The 2600 series works with any of the 16-port EtherSwitch Network
Modules series such as the NM-ESW-16.

http://www.cisco.com/en/US/products/hw/routers/ps259/products_relevant_interfaces_and_modules.html

The 2610XM can run 12.4.9T if you max out the flash and RAM. The
non-XM 2600s aren't supported beyond 12.3. The 2691 is the only non-XM
2600 that supports the T train. 12.3.9(GD) is the best you can run on
the 2610.

J


Similar ThreadsPosted
2610XM routers and VPN September 26, 2005, 2:44 pm
2610xm issue :/ April 7, 2008, 1:14 pm
Cisco 2610xm with NM-2V and vic-2fxo June 20, 2008, 9:50 pm
Cisco 2610xm NM-2V and VIC-2FXO June 20, 2008, 9:52 pm
CISCO 2610XM boot issue March 27, 2008, 2:27 pm
Checking DRAM slots on a 2610XM April 25, 2008, 12:49 am
R 2610 December 26, 2006, 11:52 pm
2610 ethernet August 22, 2004, 8:12 pm
Help - 2610/Radius/PIX/NAT November 11, 2004, 2:12 pm
2610 with an wic-1adsl December 21, 2004, 4:36 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map