2216, 2 AOMs, changed sets, and now they don't work.

2216, 2 AOMs, changed sets, and now they don't work.
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.sys.nortel  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
2216, 2 AOMs, changed sets, and now they don't work. Jeff Pratt 02-22-2006
Posted by Jeff Pratt on February 22, 2006, 1:26 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Hello.

I had a 2216 installed as a supervisor set, with 2 AOMs programmed with
agent keys. The set experienced some problems, so we swapped it out, and
now the AOMs don't work. Lamps don't flash when the set is plugged in,
nothing. The sets were both rls 1. Any ideas?

Jeff

Posted by on February 24, 2006, 2:24 am
If you were  Registered and logged in, you could reply and use other advanced thread options

Jeff Pratt wrote:
> Hello.
>
> I had a 2216 installed as a supervisor set, with 2 AOMs programmed with
> agent keys. The set experienced some problems, so we swapped it out, and
> now the AOMs don't work. Lamps don't flash when the set is plugged in,
> nothing. The sets were both rls 1. Any ideas?
>
> Jeff, form memory there has to be a board fitted inside the phone for the AOM,
maybe the new phones card is not connected inside?


Posted by John on February 24, 2006, 10:57 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Release 1 sets I believe needed external power for AOM but there was a
clever mod you could do to the set to avoid it. That is, if memory serves
correctly I haven't seen a set that old in about 10 years.

John 807
> Hello.
>
> I had a 2216 installed as a supervisor set, with 2 AOMs programmed
> with
> agent keys. The set experienced some problems, so we swapped it out, and
> now the AOMs don't work. Lamps don't flash when the set is plugged in,
> nothing. The sets were both rls 1. Any ideas?
>
> Jeff



Posted by Jeff Pratt on February 24, 2006, 11:12 am
If you were  Registered and logged in, you could reply and use other advanced thread options
John wrote:

> Release 1 sets I believe needed external power for AOM but there was a
> clever mod you could do to the set to avoid it. That is, if memory serves
> correctly I haven't seen a set that old in about 10 years.
>
> John 807
>> Hello.
>>
>> I had a 2216 installed as a supervisor set, with 2 AOMs programmed
>> with
>> agent keys. The set experienced some problems, so we swapped it out, and
>> now the AOMs don't work. Lamps don't flash when the set is plugged in,
>> nothing. The sets were both rls 1. Any ideas?
>>
>> Jeff

Got it figured. The set I had used to replace had a TN ID of M2216ACD-1,
and the set it replaced was a M2216ACD/A. Both Rls 01, but different sets
altogether.

Thanks

Jeff

Similar ThreadsPosted
460 Switch, ports will not work?... May 27, 2006, 11:04 pm
STOP what you’re doing - It doesn’t work! Y149 July 28, 2006, 5:28 pm
STOP what you’re doing - It doesn’t work! CJC3 July 29, 2006, 1:34 pm
OTM 2.00 - wont work on Win 2000 SP4 - getting upgrade August 25, 2006, 4:18 am
Looking for Nortel (freelance) engineers for project work August 10, 2006, 4:13 pm
Mobility/Session Persistence on Nortel Contivity - Does it work? February 1, 2008, 12:58 pm
BCM-50 & I2004 IP Sets March 31, 2008, 11:43 am
Page through sets on 11c? June 14, 2008, 10:59 am
Aries or Taurus sets better? April 27, 2005, 8:05 pm
Possible to page through sets on an Option 11? April 27, 2005, 8:11 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map